How To Winterize A Boat – Step By Step Guide

How To Winterize A Boat

Winterizing your boat does not have to be complicated or time-consuming; with the proper materials and maintenance tips, you can get through the process in no time. 

In this article, we will provide some essential tips on how to winterize your boat correctly so that it lasts year after year.

What Does It Mean To Winterize A Boat?

Winterizing a boat involves taking steps to protect the boat and its systems from cold weather and potentially freezing temperatures.  Here are some potential consequences of not preparing your boat for the Winter:

  • Water in the plumbing and engine can freeze, causing pipes to burst and other damage.
  • The battery can lose its charge and fail to start the boat in the spring.
  • The exterior of the boat can become damaged by wind, snow, and ice.
  • The upholstery and other materials can become moldy or mildewed due to exposure to moisture.
  • The boat may not be ready for use when the weather warms up again, resulting in lost time on the water.

10 Steps For Winterizing Your Boat:

  • Step 1: Supplies you will need
  • Step 2: Flushing and Draining Your Engines
  • Step 3: Winterize the Water System
  •  Step 4: Stabilize Your Fuel
  • Step 5: Change Engine Oil
  • Step 6: “Fogging Your Engine”
  • Step 7:  Replacing Gear Oils
  • Step 8: Lubrication
  • Step 9: Protect against theft
  • Step 10: Covering your Boat

Can I Winterize My Boat By Myself?

Can I winterize my boat myself

Yes, you can Winterize your boat yourself, which will undoubtedly save you a good amount of money. Still, for those who are unsure of themselves or simply out of town, the professional option is always available.  

Remember: As with any task that you weigh using a professional service vs. “Do it yourself”- Not correctly winterizing your boat could very well end up in you spending more money than it would have cost to just have the professional do it in the first place!

How Much Does It Cost To Winterize A boat Yourself?

To Winterize a boat yourself would cost somewhere around $200 to $250.  Should you choose to hire a professional, look to spend around $500 to winterize your boat.

Winterize Your Boat Step 1 (Supplies needed):

Supplies needed to Winterize Your Boat

To Successfully Winterize your boat this year, you will need some (or all) of the supplies below (Depending on if you wish to cover every step or only take a few):

Winterizing Your Boat Step 2: Flushing & Draining Your Engine(s)

Flushing your boat’s engine involves running clean water through the engine to remove dirt, debris, salt, and other contaminants that can build up over time and damage the motor. Here are 6 general steps you can follow to properly flush a boat engine before Winter (Or any time):

  1. Prepare the boat: Make sure the boat is in a stable position and the engine is turned off. 
  2. Connect the flushing hose: Attach a flushing hose to the engine’s flushing port or raw water intake. The flushing port is typically located near the bottom of the engine and is used to introduce clean water into the engine.
  3. Turn on the water: Turn on the water supply and allow the water to flow through the engine for a few minutes. This will help to remove dirt and debris from the engine’s cooling system. Tip: Get the engine warm/hot to help loosen up more debris.  Warning For Boats On Land: Do not run your engine without running water
  4. Check the water flow: Observe the water flow from the engine’s exhaust to ensure that it is clear and free of debris. If the water flow is dirty or obstructed, allow the water to run for a few more minutes until it is clear.
  5. Turn off the water: When the water flow is clear, turn off the water supply and disconnect the flushing hose.
  6. Dry the engine: Use a towel or chamois cloth to dry the exterior of the engine. This will help to prevent rust and corrosion.

By following these steps, you can effectively flush your boat engine and make sure that it is ready when Spring comes around.

Winterizing Your Boat Step 3: Winterizing your Water System

Again, winterizing anything that holds water will be of the utmost importance, as freezing water will expand and break anything that cannot expand with it, such as hoses and pipes.

Drain all freshwater plumbing systems such as heads, sinks, and tanks before pumping antifreeze into them to protect them from freezing temperatures.   

Use the “Pink” anti-freeze you find in Marine and RV Stores because this is the anti-freeze that is safe for drinking systems!

Additionally, you should also drain any other internal systems like the bilge and raw water washdown.  

How To Do This: 

  1. For Fresh and Saltwater systems- Open every fixture (Hot and cold) to drain most of the water left in the lines, but leave everything open. 
  2. Then, find the primary feed hoses from each source, disconnect them, and place them in a bucket filled with the Pink anti-Freeze (You can do Fresh and Saltwater one at a time, of course). 
  3. Turn the pumps back on until you see the Anti-Freeze coming out of every fixture, then stop.   
  4. Finally, reattach the freshwater and saltwater feed hoses before you finish or else you could forget by the time Spring rolls around and wonder what went wrong.
Winterizing Your Boat Step 4 Stabilize Your Fuel

Winterizing Your Boat Step 4: Stabilize Your Fuel

Stabilizing your boat’s fuel for Winter (Or any extended period of non-use) is an essential step in maintaining the health of a boat’s engine.

Fact:  Fuel can deteriorate in as little as 60 days

There are several steps you can take to stabilize fuel in a boat for winter:

  1. Run the engine: Before adding the fuel stabilizer or new fuel, run the engine for a few minutes to help circulate the old fuel and remove any water or contaminants that may be present.
  2. Add a fuel stabilizer: Fuel stabilizers are chemical additives that help to prevent fuel from degrading over time. They work partly as an antioxidant and partly by absorbing water before the fuel can.  Fuel can be stabilized for up to 2 years.
  3. Add Fresh Fuel:  Put fresh fuel into your boat after adding the stabilizer to help it mix better. Do not top off!  Leave some room for expansion (Approx 90% is good).
  4. Run the engine again: After adding the fuel and stabilizer, run the engine for a few more minutes to help circulate the treated fuel throughout the system.
  • Tip: Use a Quality Marine Fuel Stabilizer such as STA-BIL 360 Marine to ensure you are getting the best possible treatment

Fuel Stabilizer FAQ:

Should I keep my gas tank full in the Winter? 

No, you should add fresh fuel, but you should always leave some room in the tank for expansion.

At what temperature does gas freeze?

For pure gasoline to freeze, it usually needs to reach a temperature between -40 degrees and -200 degrees; however, most companies that deliver gasoline will mix in additives to prevent freezing, so the exact freezing point of gasoline will vary.

Why shouldn’t you let your gas tank run low in the winter?

It is not recommended to let your gas tank run low in the winter for a couple of reasons:

  1. Cold temperatures can cause condensation to form in the fuel tank, which can lead to water in the fuel. If the fuel tank is low, there is less fuel to dilute the water, which can cause engine problems.
  2. Running the gas tank low can also cause the fuel pump to pick up debris from the bottom of the tank, which can clog the fuel filter and cause engine problems.

Winterizing Your Boat Step 5: Replace Engine Oil

Changing engine oil is an important part of boat maintenance. It helps to prevent corrosion and eliminate moisture, which can lead to power loss, poor fuel economy, and potential engine failure.

Here are the general steps you can follow to change the engine oil in a boat:

  1. Gather the supplies: You need a new oil filter, an oil drain pan, and the appropriate oil for your boat’s engine. Consult the owner’s manual or the manufacturer’s website to determine the correct type of oil to use but ALWAYS use “Marine” supplies because they are specially formulated for boat engines
  2. Warm up the engine: Start the engine and let it run for a few minutes to warm up the oil. This will help to loosen any dirt or debris that may be present in the oil.
  3. Locate the oil filter and drain plug: Consult the owner’s manual or the manufacturer’s website to locate the oil filter and drain plug on your boat’s engine. The oil filter is typically located near the top of the engine, while the drain plug is usually located near the bottom.
  4. Remove the oil filter: Use an oil filter wrench to loosen and remove the oil filter. Be careful not to spill any oil as you remove the filter.
  5. Drain the oil: Place the drain pan under the drain plug and use a wrench to loosen and remove the drain plug. Allow the oil to drain completely from the engine.
  6. Replace the oil filter: Install the new oil filter by hand, making sure to tighten it securely. Consult the owner’s manual or the manufacturer’s website for the correct torque specifications.
  7. Add new oil: Consult the owner’s manual or the manufacturer’s website to determine the correct amount of oil to use in your engine. Pour the oil into the engine through the oil fill hole, making sure not to overfill.
  8. Check the oil level: Use the dipstick to check the oil level and add more oil as needed. Consult the owner’s manual or the manufacturer’s website for the correct oil level.
More Content Coming Soon To The Sportfishtrader Blog
More Content Coming Soon To The Sportfishtrader Blog
Sell Your Fishing Boat Black
Click anywhere to get started!


I am a professional photographer and social media influencer in the boating and fishing niches.

Share on.